Cleanfit CPA473 - Retractable holder for fibrous and sticky media

Manual or automatic retractable assembly Cleanfit CPA473

Assembly with ball valve for the chemical, paper, and wastewater industries

CPA473

Compare

Specs at a glance

Process temperature

PA pressure cylinder (manually only):
Max. 80 °C (176 °F)
Stainless steel pressure cylinder:
up to 100°C (212 °F) with continuous operation up to 6 bar (87 psi)
Process pressure

PA pressure cylinder: Max. 6 bar (87 psi)
Stainless steel pressure cylinder: Max. 10 bar (145 psi)
Pneumatic outlet safety seal:
6 bar at 100 °C (87 psi at 212 °F)

See all specifications

Field of application

The Cleanfit CPA473 retractable assembly is designed for application in fibrous or sticky media. Its patented sleeve seals and integrated scrapers make sure that nothing sticks to the sensor. Cleanfit offers highest operating comfort: You can replace sensors and even service the assembly while the process is running. The optional electric or pneumatic control system enables automated cleaning and calibration even in difficult processes.

Cleanfit CPA473 is intended for use in tanks and pipes in:

Chemical industry
Paper industry
Wastewater / industrial water
Power plants
Refuse incinerators

It is suitable to be used with pressures of up to 10 bar (stainless steel cylinder) or 6 bar (PA cylinder).

Benefits

Safe and reliable separation from the process by ball valve, even under harsh conditions
No process interruption for electrode cleaning and calibration – saves maintenance time and costs
Extended operating life of electrodes due to automatic cleaning
Suitable for application in sticky and fibrous media thanks to integrated scraper and sleeve seals
Flexible adaptation to all applications by great variety of materials and process connections

Predecessor

Cleanfit P CPA477

CPA463

Success stories

Präzise Feuchtemessung im Betonmischwerk der Volken Group

Mit dem Materialfeuchtesensor Solitrend MMP41 kann der Feuchtegehalt zuverlässig und präzise gemessen werden.
Read the full story
Automated pH measuring point in wastewater

The Dow plant in Stade relies on Endress+Hauser solutions for pH monitoring in the treatment of production wastewater.
Read the full story
Water/steam circuit at GETEC PARK.SWISS

GETEC SWISS.PARK improves plant efficiency and decreases downtimes thanks to Endress+Hauser SWAS System
Read the full story
Measurable and testable: Monitoring with Teqwave

Efficient component cleaning is an important part of the production of industrially manufactured components. Borer Chemie AG therefore relies on the concentration measurement with Teqwave F, I and T.
Read the full story
Liquid analysis in LNG trains

The various process steps in a gas liquefaction plant must comply with different limit values. Our products are ideally suited for these processes.
Read the full story

Simple products
Easy to select, install and operate

Technical excellence

Simplicity

What is FLEX?

Standard products
Reliable, robust and low-maintenance

Technical excellence

Simplicity

What is FLEX?

High-end products
Highly functional and convenient

Technical excellence

Simplicity

What is FLEX?

Specialized products
Designed for demanding applications

Technical excellence

Simplicity

Variable

What is FLEX?

FLEX selections	Technical excellence	Simplicity
F L E X Fundamental selection Meet your basic measurement needs	Technical excellence	Simplicity
F L E X Lean selection Handle your core processes easily	Technical excellence	Simplicity
F L E X Extended selection Optimize your processes with innovative technologies	Technical excellence	Simplicity
F L E X Xpert selection Master your most challenging applications	Technical excellence	Simplicity Variable

Learn more about the FLEX selections

Could also interest you

About us
No assembly, no measurement!

The safety and operating comfort of an analytical measuring point starts with using the right assembly. Our flexible assembly production ensures that you get the right assembly for your needs.
More information

Measuring principle

Potentiometric
Application

Chemical industry, paper industry, wastewater, industrial water, power plants, refuse incinerators, sugar industry
Installation

Retractable assembly with ball valve
Characteristic

Open and closed tank, piping (min DN80)
Design

Manual or pneumatical
Manual or pneumatical ball valve
Can be fully automated with CPC30 / 300
Integrated rinse chamber with connection G 1/4" or NPT 1/4"
Material

Seals: EPDM / FPM / perfluoroelastomer
Electrode holder: stainless steel 1.4404
Ball valve: Stainless steel 1.4401, PTFE
Inlet safety seal: PVDF, PTFE, Viton®
Outlet safety seal: PVDF, Stainless steel 1.4404
Rinse connection socket: Stainless steel 1.4404
Dimension

Immersion depth: 61 to 235mm
(2.4 inch to 9.25 inch)
Process temperature

PA pressure cylinder (manually only):
Max. 80 °C (176 °F)
Stainless steel pressure cylinder: up to 100°C (212 °F) with continuous operation up to 6 bar (87 psi)
Process pressure

PA pressure cylinder: Max. 6 bar (87 psi)
Stainless steel pressure cylinder: Max. 10 bar (145 psi)
Pneumatic outlet safety seal:
6 bar at 100 °C (87 psi at 212 °F)
Connection

G1¼ internal thread, DN50, DN65, ANSI 2"
Additional certifications

3.1. acc. to EN 10204

Measuring principle

Sensor ORP / Redox
Application

Chemical industry, paper industry, wastewater, industrial water, power plants, refuse incinerators, sugar industry
Installation

Retractable holder with ball valve
Characteristic

Open and closed tank, piping (min DN80)
Design

Manual or pneumatical
Manual or pneumatical ball valve
Can be fully automated with CPC30 / 300
Integrated rinse chamber with connection G 1/4" or NPT 1/4"
Material

Seals: EPDM / FPM / perfluoroelastomer
Electrode holder: stainless steel 1.4404
Ball valve: Stainless steel 1.4401, PTFE
Inlet safety seal: PVDF, PTFE, Viton®
Outlet safety seal: PVDF, Stainless steel 1.4404
Rinse connection socket: Stainless steel 1.4404
Dimension

Immersion depth: 61 to 235mm
(2.4 inch to 9.25 inch)
Process temperature

PA pressure cylinder (manually only):
Max. 80 °C (176 °F)
Stainless steel pressure cylinder:
up to 100°C (212 °F) with continuous operation up to 6 bar (87 psi)
Process pressure

PA pressure cylinder: Max. 6 bar (87 psi)
Stainless steel pressure cylinder: Max. 10 bar (145 psi)
Pneumatic outlet safety seal:
6 bar at 100 °C (87 psi at 212 °F)
Connection

G1¼ internal thread, DN50, DN65, ANSI 2"
Additional certifications

3.1.B EN 10204

We value your privacy

We use cookies to enhance your browsing experience, collect statistics to optimize site functionality, and deliver tailored advertisements or content.

By selecting "Accept all", you consent to our use of cookies.
For further details please review our cookie policy .

	EN
01/11/2009
01/02/2005
01/09/2003
01/10/2002

Language:	English
Version:	01/11/2009
File size:	961.3 KB
File name:	TI344CEN_1109.pdf

Language:	English
Version:	22/07/2015
File size:	2 MB
File name:	TI00404CEN_1315.pdf

	EN
01/11/2009
01/05/2005
01/02/2005
01/01/2004
01/08/2003

Language:	English
Version:	01/11/2009
File size:	2 MB
File name:	Ba344cen_1109.pdf

Language:	Japanese
Version:	08/02/2024
File size:	2.6 MB
File name:	CP00010CJA_1315_1024_pH_selection_guide.pdf

Language:	German
Version:	01/12/2021
File size:	3.3 MB
File name:	CP00010CDE_1621_pH Auswahlhilfe_2021.pdf

	EN
22/07/2015
01/07/2006

	EN
20/02/2025

	EN
24/02/2025

	EN
19/02/2025

Manual or automatic retractable assembly Cleanfit CPA473

Assembly with ball valve for the chemical, paper, and wastewater industries

Specs at a glance

Process temperature

Process pressure

Field of application

Benefits

Predecessor

Success stories

Präzise Feuchtemessung im Betonmischwerk der Volken Group

Automated pH measuring point in wastewater

Water/steam circuit at GETEC PARK.SWISS

Measurable and testable: Monitoring with Teqwave

Liquid analysis in LNG trains

Could also interest you

No assembly, no measurement!

Measuring principle

Application

Installation

Characteristic

Design

Material

Dimension

Process temperature

Process pressure

Connection

Additional certifications

Measuring principle

Application

Installation

Characteristic

Design

Material

Dimension

Process temperature

Process pressure

Connection

Additional certifications

Back

Technical Information Retractable assembly Cleanfit P CPA473

Technical Information Topcal S CPC310

Operating Instructions Cleanfit P CPA473

EA for Cleanfit CPA473

EA Spare parts kits for Cleanfit CPA473 process retractable assemblies

EA Spare parts kits for Cleanfit CPA472D, CPA473 and CPA474 process retractable assemblies

SD CleanFit Servicekits / Spare part kits

産業プロセスにおけるpH測定

pH measurement in industrial processes

pH-Messung in Industrieprozessen

Back

Manual Kits CPA473 2013

KIT CPA473 retractable pipe short versio

KIT CPA473 electr. guide long

KIT CPA473/474 cylinder PA short

KIT CPA473/474 cylinder PA long

KIT CPA471 long+474 short: Cylinder SS

KIT CPA473/474 cylinder 1.4404 long

Kit CPA473 rinsing chamber

Kit CPA47: intermediate flange ball valv

KIT CPA473/474: Rinse nozzle G1/8-G1/4

KIT CPA473/474: Rinse nozzle G1/8-NPT1/4

Kit CPA473 ball valve

Kit CPA473 pneumatic drive complete

Kit CPA473 drive cpl. pneum. / electr.

Kit CPA47x:2pneum.prox.switch ball valve

Kit CPA473, KCI pipe pneumatic

Kit CPA473 KCl-pipe manual

KIT CPA471/472 shaft pneum long

KIT CPA471/472 lift tube gel hand long

KIT CPA473/474 pneum. re.pipe gel 360mm

KIT CPA473/474 manual, re.pipe gel 360mm

KIT CPA47x:stop bolt with handle (1 pc.)

CPA471...5 all seals w/o medium contact

KIT CPA47x pneu.connection G1/8 AD6 10p

CPA473 Seals w.media contact EPDM >10/07

CPA473 Seals w. media contact FPM >10/07

CPA473 Seals w.media contact KALRE>10/07

CPA473 EPDM: Scrapers f.ball valve>10/07

CPA473 FPM: Scrapers f.ball valve>10/07

CPA473 KALRE: Scrapers f.ballvalve>10/07

Cleaning and calibration system
Liquiline Control CDC90

Cleaning and calibration system
Liquiline Control CDC90